Newsfeed 8th Nanoconference 2018 in Dortmund, Germany

Follow us on twitter:

https://twitter.com/coatema 

and/or LinkedIn

https://www.linkedin.com/feed/

 


For more information on this event and events coming up soon please contact:

Marketing Executive Tanja Simone

Phone: +49 (0) 2133 97 84 121
E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

CES 2019 Las Vegas, USA

Coatema will be exhibiting at the CES 2019 in Las Vegas, USA. CES is the world's gathering place for all those who thrive on the business of consumer technologies. It has served as the proving ground for innovators and breakthrough technologies for 50 years — the global stage where next-generation innovations are introduced to the marketplace.

Owned and produced by the Consumer Technology Association (CTA), it attracts the world's business leaders and pioneering thinkers.

Visit us for a consultation. We will be at CES Consumer Technology Association   -  OE-A Joint Pavilion Booth No. 40721

Venue information: https://cdn.ces.tech/ces/media/pdfs/ces-2019-svm-round-5-final.pdf

Read more at: https://www.ces.tech/international.aspx

For more information on this event please contact:

Marketing Executive Tanja Simone

Phone: +49 (0) 2133 97 84 121
E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

IDTechEx Show Santa Clara

Coatema will be exhibiting at the IDTechEx Show! in Santa Clara, CA USA November 14-15, 2018. The IDTechEx Show! presents the latest emerging technologies at one event, with eight concurrent conferences and a single exhibition covering 3D Printing, Electric Vehicles, Energy Storage, Graphene, Internet of Things, Printed Electronics, Sensors and Wearable Technology.

Visit us at our booth for a consultation.

Address: Santa Clara Convention Center, CA, US -  Booth No. A10

 

Read more at: https://www.idtechex.com/usa2018/show/en/contact

 

For more information on this event please contact:

Marketing Executive Tanja Simone

Phone: +49 (0) 2133 97 84 121
E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

 

COMPOSITE EUROPE STUTTGART

Coatema will be exhibiting at the COMPOSITE EUROPE in Stuttgart, Germany November 6 - 8, 2018. Composite Europe is established as an international business platform for the composite industry. New modules should facilitat the matchmaking and generate new business for both, exhibitors and visitors. Over 9,000 trade visitors, including 40% from abroad from 63 countries. As the international industry meeting point in Europe’s biggest composites market, COMPOSITES EUROPE combines tried and tested solutions and efficient innovations. The trade fair reflects the variety of goods and services and the innovative strength of the entire industry. Major topics at the fair are state-of-the-art production and processing technologies focussing, among others, on concepts for lightweight construction and automotive applications.

Visit us at booth no. 49, Hall 9 for a consultation. 

Website: https://www.composites-europe.com/en/

 

 
Messe Stuttgart
Messepiazza 1
70629 Stuttgart
Deutschland

Address: Messe Stuttgart, Messepiazza 1, 70629 Stuttgart, Germany

 
Messe Stuttgart
Messepiazza 1
70629 Stuttgart
Deutschland

Marketing Contact: This email address is being protected from spambots. You need JavaScript enabled to view it.

Phone: +49 (0) 21 33 97 84 121

 
Messe Stuttgart
Messepiazza 1
70629 Stuttgart
Deutschland
 
Messe Stuttgart
Messepiazza 1
70629 Stuttgart
Deutschland

 

COMPAMED 2018

COMPAMED is the trade fair for suppliers and manufacturers of medical technologies in Düsseldorf / Germany from 12 - 15 November 2018. This year Coatema will be presenting its new alliance COMEDCO at IVAM Joint-Pavilion in Hall 08A, Booth No. F19. Coating and Converting combined:

Reaching your objective fast and safe with a new alliance: COMEDCO. The new alliance assists pharmaceutical companies with their start into the manufacturing and packaging process of transdermal dressings and oral dispersible films. The technology leaders Coatema Coating Machinery GmbH and OPTIMA life science GmbH are behind COMEDCO with their expertise in converting and coating with pharmaceutical medicines.

Today’s technology offers new methods to administer medication. Pills and syringes will remain; however, there are many reasons to expand how to administer medications. An example is older people in need of care who have difficulty swallowing and where pills might not safely reach the intended “target”. Or illnesses, which may require frequent shots. Cases like these require alternative solutions that are still effective but more convenient for the patient.

It also makes sense to transport the substances as close as possible directly to the affected area during administering. A lower drug concentration and less stress to the gastrointestinal tract are additional advantages to choose transdermal dressings or oral dispersible films.

A higher demand in oral dispersible film (ODF) and transdermal dressings (TDS – transdermal systems) is already apparent for the machine manufacturing industry, especially in the Asian and U.S. market.

New administration forms for pharmaceutical agents becoming increasingly important

The packaging industry has the responsibility to follow this trend and to develop new designs and present solutions. The idea behind COMEDCO is to make it easy and safe for pharmaceutical companies to start their new developments for transdermal and ODF products. The COMEDCO portfolio includes laboratory or development equipment platforms, which are scalable to medium and large size production capacities.

Development expenses occur during the launch of ODF or TDS product. Here the machine builder can help to reach the objective faster and with less expenditure. Answers to questions like: What is the best suitable application and dosing system for a certain drug? What is the best carrier material for which drug? How can a correct homogeneous substance per piece or unit be guaranteed and controlled?

The production of transdermal dressings and ODF products starts with the coating process where the substance is applied to the carrier material by a COMEDCO machine. Depending on the product, a certain drying time has to be considered which takes place within the machine.

Subsequently the carrier material with the applied substance is cut and rolled into individual rolls. The product, depending on the drying process and the strict separation of different pharmaceutical substances, to avoid cross-contamination, may require a batch process. The coating process takes place in the first part of the COMEDCO machine.

Our COMEDCO partner Coatema Coating Machinery GmbH provides decade long expertise in the development and distribution of different coating machinery. Projects from the medical and pharmaceutical industry are a part of their expertise. The company is well known worldwide for its diverse technology center in coating technologies. With COMEDCO, customers are able to rely on our experts, to define the different possibilities and discuss advantages and disadvantage of the different technologies for their product. In addition, our coating experts are in a close contact with scientific institutes and well connected through several scientific projects.

Expert Duo

The packaging process is completed in the second part of the COMEDCO machine. In this part of the machine, existing (product depending) carrier material can be removed, new carrier material introduced, film would be cut to a defined size, separated and reunited on a carrier film and packaged. Packaging of transdermal dressing is often more complex than packaging of oral dispersible film due to a wider variety of product options and different processing methods. The COMEDCO machine offers continuous or intermittent converting and packaging processes.

This part of the COMEDCO machine is based on technologies from Optima Life Science. Optima Life Science offers expertise from a variety of completed projects for ODF and TDS products, as well as from state-of-the-art wound care packaging processes. The company made a name for itself across the industry through flexibility with complex automated processes. First with the production and packaging of diagnostic products and thereafter, in medical web converting.

Optima Life Science is part of the Optima Packaging Group, which has successfully built manufacturing and packaging machinery for decades, among other industries, also for the pharmaceutical industry and life science companies.

 Loose connection or strong partnership?

An intense search for the right partner preceded the COMEDCO alliance. One of the deciding factors for the alliance was the perfectly complementary expertise of Coatema Coating Machinery GmbH and Optima Life Science. Both companies are similar regarding their focus – keywords are: pioneering achievements, philosophy, and company size. In addition, both companies are convinced that the partnership will bring many advantages to customers and end-users.

The contractual partner for customers will always be Optima Life Science, therefore, customers will benefit from one responsible party and a clear structure. Both companies provide expert contacts. In addition, both companies are still operating as separate entities if the project is related to only coating or packaging.

COMEDCO made its first public appearance during the Achema show. This joint kick-of emphasizes the commitment to the alliance. A COMEDCO website is also available (www.comedco.de). At the start of 2018, the founding of COMEDCO was contractually finalized. An initial joint order was won shortly after.

http://www.comedco.de/en.

https://www.compamed.de/

Visit us at our booth for a consultation.

Address: Messe Duesseldorf, Hall 8a, Stockumer Kirchstrasse 61, 40474 Duesseldorf Germany

https://www.compamed.de/

For more information on this new alliance please contact:

Marketing Executive Tanja Simone: 

Phone: +49 (0) 2133 97 84 121
E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

 

KROENERT and Coatema Under One Umbrella Company

+++++ PRESS RELEASE +++++

 

KROENERT and Coatema Under One Umbrella Company

 

Hamburg/Dormagen, 29 August 2018 – Hamburg-based ATH Altonaer-Technologie-Holding GmbH –  owner of KROENERT GmbH & Co KG – and Coatema Coating Machinery GmbH, have announced that they have signed an agreement under which ATH will take over all shares of Coatema.

KROENERT and Coatema are manufacturers of machinery and systems in the coating and converting industry and global leaders in their respective market sectors. Merging the companies under the umbrella of ATH will create a group with a comprehensive product portfolio of coating applications and a high degree of innovative power.

Both companies and brands will remain independent and continue to operate from their respective headquarters as before. Detlev Dieke and Dr. Andreas Giessmann will also retain their positions as managing directors of Coatema.

Dr. Tarik Vardag, Managing Director of ATH and KROENERT emphasises: “As a leading manufacturer of tailor-made coating and laminating lines, this alliance will further consolidate our international market position and, most importantly, it will set new technological standards. We are particularly impressed by the product range and the innovative power of Coatema, significantly boosted through close networking with research and development centres. KROENERT and Coatema are an ideal match and I greatly look forward to our future collaboration.”

“The integration of Coatema in the ATH Group creates a product range which is unique on the market in the world of coating. Customers are provided with comprehensive support, from research to laboratory facilities to large-scale production systems and special-purpose machinery. We are pleased to now be a member of the ATH Group and thus be able to apply our combined know-how to offer solutions to a wide variety of industrial sectors,” adds Dr. Andreas Giessmann, Managing Director of Coatema.

About ATH

Under the umbrella of the ATH Altonaer-Technologie-Holding GmbH, the companies KROENERT, DRYTEC and ZAE deliver innovative technologies, efficient machines and drive systems to customers around the world. ATH is based in Hamburg and employs about 400 people. Further information: www.ath-group.de.

About KROENERT

Since 1903 KROENERT GmbH & Co KG is developing, engineering and manufacturing customized line solutions in the field of coating technology for web-like materials such as paper, foil and film. The products manufactured on KROENERT machines are used in the flexible packaging industry, for technical applications and renewable energies as well as environmental protection. KROENERT’s headquarters are in Hamburg, Germany, where its own research and test centres are also located. Further information: www.kroenert.de.

About Coatema

Coatema Coating Machinery GmbH offers a full range of equipment and R&D for coating, printing and laminating systems for Roll-to-Roll and Sheet-to-Sheet applications. The company has over 40 years of experience in the textile, foil and paper markets and offers lab, pilot and production lines with a focus on these high tech markets and innovative technologies. Coatema’s headquarters are in Dormagen, Germany, and the company employs about 45 people. Further information:
www.coatema.de.

 

Press Contact:

 

ATH Altonaer-Technologie-Holding GmbH
Dr. Tarik Vardag, Managing Director
Phone: +49 40 85393 200
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
ATH Altonaer-Technologie-Holding GmbH | Schuetzenstrasse 105 | 22761 Hamburg | Germany
Phone: +49 40 85393 02 | Fax: +49 40 85393 106 | www.ath-group.de

KROENERT GmbH & Co KG
Markus Waterkamp, Managing Director
Phone: +49 40 85393 167
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
KROENERT GmbH & Co KG | Schuetzenstrasse 105 | 22761 Hamburg | Germany
Phone: +49 40 85393 01 | Fax: +49 40 85393 171 | www.kroenert.de

 

Coatema Coating Machinery GmbH
Dr. Andreas Giessmann, Managing Director
Phone: +49 2133 9784 120
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Coatema Coating Machinery GmbH | Roseller Strasse 4 | 41539 Dormagen | Germany
Phone: +49 2133 9784 0 | Fax: +49 2133 9784 170 | www.coatema.de

Coatema at INDTECH2018 Vienna, Austria

Coatema will be exhibiting at the INDTECH2018, the European "INDustrial TECHnologies 2018 - innovative industries for smart growth" in Vienna from 29-31 October, 2018.Matchmaking, talks with experts and academics, exhibitions = Innovative industries for smart growth. 1000 expected participants, 80 speakers from more than 30 countries in Europe and across the globe, 20 talks in 3 parallel sessions, interactive discussions in world cafés and fish-bowls, matchmaking events, site visits to 5 leading Austrian companies, exhibition with over 20 leading international organisations, 10 thematic workshops on 29 October.

For promotional material click here: 

Flyer Announcement INDTECH2018 Vienna, Austria

Presentation INDTECH2018 Vienna, Austria

Programme INDTECH2018 Vienna, Austria

 

Website: https://www.indtech2018.eu/

 

Address: Messe Wien Exhibition & Congress Center, Messeplatz 1, Austria


 

or contact: This email address is being protected from spambots. You need JavaScript enabled to view it.

Visit by Minister of Economy of North-Rhine Westfalia Andreas Pinkwart at Coatema

+++++ PRESS RELEASE +++++

Visit by Minister of Economy of North-Rhine Westfalia Andreas Pinkwart

Dormagen, 20 Juli 2018 –   Global acting German Company Coatema has 48 employees and is very successful for over 40 years. The family owned business in second generation has experience in coating, laminating and printing with its core business in custom made machinery and machinery from Lab to Fab. New Technologies and cooperations with other middle-class companies have made Coatema to one of the market leaders world wide.

The focus is on high tech markets, world class full-service and a versatile R&D centre for coating, printing and laminating. This enables Coatema to offer complete Lab to Fab technologies.

In March 2018, Coatema has been honored by the Network Future through Innovation. As a finalist in cooperation with the Fraunhofer ISC. The project honored is about a cost efficient electrochromic film for smart windows.

 Minister Pinkwart was very impressed of the innovation made by Coatema.

 

During his summer journey through North-Rhine-Westfalia visiting companies, he decided to visit also Coatema and to get to know more about this innovative company. The company gave him an overwiev about their strategy in innovation and current status of R&D projects. A tour through the Coatema´s R&D Center was guided by the Coatema management team. Pinkwart said: „Innovation through cooperation is the competence of Coatema. I was excited about the latest idea of an „open Fab“. This is a platform where different cross-sectional technologies get together and interchange. It shall be used by all middle-class companies and would improve business conditions in general in the state of North-Rhine-Westfalia.”

 

COMEDCO

+++++ PRESS RELEASE +++++

COMEDCO – the complete solution for transdermal dressings and oral dispersible films

A new alliance: Coating and converting combined

Reaching your objective fast and safe with a new alliance: COMEDCO. The new alliance assists pharmaceutical companies with their start into the manufacturing and packaging process of transdermal dressings and oral dispersible films. The technology leaders Coatema Coating Machinery GmbH and OPTIMA life science GmbH are behind COMEDCO with their expertise in converting and coating with pharmaceutical medicines.

Today’s technology offers new methods to administer medication. Pills and syringes will remain; however, there are many reasons to expand how to administer medications. An example is older people in need of care who have difficulty swallowing and where pills might not safely reach the intended “target”. Or illnesses, which may require frequent shots. Cases like these require alternative solutions that are still effective but more convenient for the patient.

It also makes sense to transport the substances as close as possible directly to the affected area during administering. A lower drug concentration and less stress to the gastrointestinal tract are additional advantages to choose transdermal dressings or oral dispersible films.

A higher demand in oral dispersible film (ODF) and transdermal dressings (TDS – transdermal systems) is already apparent for the machine manufacturing industry, especially in the Asian and U.S. market.

New administration forms for pharmaceutical agents becoming increasingly important

The packaging industry has the responsibility to follow this trend and to develop new designs and present solutions. The idea behind COMEDCO is to make it easy and safe for pharmaceutical companies to start their new developments for transdermal and ODF products. The COMEDCO portfolio includes laboratory or development equipment platforms, which are scalable to medium and large size production capacities.

Development expenses occur during the launch of ODF or TDS product. Here the machine builder can help to reach the objective faster and with less expenditure. Answers to questions like: What is the best suitable application and dosing system for a certain drug? What is the best carrier material for which drug? How can a correct homogeneous substance per piece or unit be guaranteed and controlled?

The production of transdermal dressings and ODF products starts with the coating process where the substance is applied to the carrier material by a COMEDCO machine. Depending on the product, a certain drying time has to be considered which takes place within the machine.

Subsequently the carrier material with the applied substance is cut and rolled into individual rolls. The product, depending on the drying process and the strict separation of different pharmaceutical substances, to avoid cross-contamination, may require a batch process. The coating process takes place in the first part of the COMEDCO machine.

Our COMEDCO partner Coatema Coating Machinery GmbH provides decade long expertise in the development and distribution of different coating machinery. Projects from the medical and pharmaceutical industry are a part of their expertise. The company is well known worldwide for its diverse technology center in coating technologies. With COMEDCO, customers are able to rely on our experts, to define the different possibilities and discuss advantages and disadvantage of the different technologies for their product. In addition, our coating experts are in a close contact with scientific institutes and well connected through several scientific projects.

Expert Duo

The packaging process is completed in the second part of the COMEDCO machine. In this part of the machine, existing (product depending) carrier material can be removed, new carrier material introduced, film would be cut to a defined size, separated and reunited on a carrier film and packaged. Packaging of transdermal dressing is often more complex than packaging of oral dispersible film due to a wider variety of product options and different processing methods. The COMEDCO machine offers continuous or intermittent converting and packaging processes.

This part of the COMEDCO machine is based on technologies from Optima Life Science. Optima Life Science offers expertise from a variety of completed projects for ODF and TDS products, as well as from state-of-the-art wound care packaging processes. The company made a name for itself across the industry through flexibility with complex automated processes. First with the production and packaging of diagnostic products and thereafter, in medical web converting.

Optima Life Science is part of the Optima Packaging Group, which has successfully built manufacturing and packaging machinery for decades, among other industries, also for the pharmaceutical industry and life science companies.

Loose connection or strong partnership?

An intense search for the right partner preceded the COMEDCO alliance. One of the deciding factors for the alliance was the perfectly complementary expertise of Coatema Coating Machinery GmbH and Optima Life Science. Both companies are similar regarding their focus – keywords are: pioneering achievements, philosophy, and company size. In addition, both companies are convinced that the partnership will bring many advantages to customers and end-users.

The contractual partner for customers will always be Optima Life Science, therefore, customers will benefit from one responsible party and a clear structure. Both companies provide expert contacts. In addition, both companies are still operating as separate entities if the project is related to only coating or packaging.

COMEDCO made its first public appearance during the Achema show. This joint kick-of emphasizes the commitment to the alliance. A COMEDCO website is also available (wwww.comedco.de). At the start of 2018, the founding of COMEDCO was contractually finalized. An initial joint order was won shortly after.

http://www.comedco.de/en

Modulares Click & Coat®-System von Coatema

Ein repräsentativer Artikel in der aktuellen Februar Ausgabe 67 des C2 Coating & Converting Fachmagazins zum Thema „Beschichtung ist unsere Kernkompetenz“. Krefelder Firma Laufenberg nimmt das neue Technikum und Innovationszentrum mit dem modular aufgebautem Click & Coat®-System  von Coatema in Betrieb. Weiter zum Artikel  BESCHICHTUNG IST UNSERE KOMPETENZ.

 

 

Coatema at the drupa 2016

Düsseldorf, GERMANY. As one of the major highlights in Printed Electronics at drupa, Coatema presents a live demonstration of its innovative and bestselling “Smartcoater” and proudly introduces its new joint brand Temicoat for pioneering printed nano structures.

Germany's leading manufacturer of coating, printing and laminating machines for Printed Electronics is proud to present another exciting novelty at this year's drupa show. Especially for research and process upscaling the Coatema Smartcoater system has been introduced with a highly innovative 6-in-1 coating unit. In addition to slot die and rotary screen printing, four other coating units have been integrated, thus enabling highly efficient process development and flexible upscaling in Electronic Printing and Organic Photovoltaics.

This bestseller is in live demonstration, equipped with a UV-LED curing system by Hereaus, printing of silver ink and advanced flashlight sintering by Hereaus. The fully working machine will be presented at the Coatema booth B05 in hall 6. Experienced coating and printing experts will be available for any questions and hands-on advice.

In addition, Coatema and Temicon – well-established SMEs based in Germany`s NRW region – are proud to introduce their joint brand Temicoat, making seamless nanoimprint technology and solutions available to display, photovoltaic, biomedial and bionic applications. The provided one-stop-shopsolutions for printed micro- and nanostructures comprise the full production chain, including machines, chemistry, manufacturing and products.

About temicon GmbH
temicon GmbH is the leading producer of high-quality micro- and nanostructured products serving as key components for applications like lighting, display, life science, solar technology and environmental engineering. The technology enterprise has established a unique technology platform for micro- and nanostructure technology aspects. The company uses lithographic processes, thin-film technologies, electroforming, injection molding, R2R- and R2P-technologies for the production of micro- and nanostructures – with special focus on large size patterning and serial production. For more information,
visit www.temicon.com

About Coatema GmbH
Since 40 years Coatema is well known as the leading manufacturer of innovative machines in coating, printing and laminating technology. From in-house lab solutions to production plants Coatema provides the full range of advanced customer solutions. For more information, visit www.coatema.de

temiCoat® at the LOPEC 2016

World’s biggest event for large-area, organic and printed electronics

Dormagen, GERMANY – Micro-/Nanotechnology specialists Coatema and temicon have announced their joint release of temiCoat® as a new brand of their joint activities in the field of nanoimprinting and nanostructuring machinery. temiCoat® will be introduced for the first time to the public during LOPEC 2016 exhibition in Munich.

Coatema and temicon, both technological leaders in their industry, have joined their experiences in the brand temiCoat® in order to provide the technologically most advanced nanoimprinting and nanostructured coating lines to customers on international scale . temiCoat® will exhibit and provide live demos at LOPEC 2016, the world´s most prestigious event and congress for printed electronics and organic large-area electronic coatings.

temicon holds a uniquely deep expertise in the field of nanoimprinting tools and machinery. Coatema has more than 40 years of engineering experience and is technologically leading in manufacturing precise coating, printing and laminating lines. The new brand temiCoat® combines the advantages and experiences of both companies to deliver the most advanced and most reliable nanoprinting turnkey solutions and guaranteed products.

Visitors interested in seeing live production of nanoprinting and nanostructuring coating lines are kindly invited to visit the Demonstration Line at the LOPEC in Munich from April 6th to April 7th, 2016.

For a free invitation fpr LOPEC visit please contact temiCoat® via Email. FOr further information please contact temiCoat® via Email or phone: This email address is being protected from spambots. You need JavaScript enabled to view it. or +49.231.47730-550.

About Coatema GmbH
Since 40 years Coatema is well known as the developer of innovating products in coating, printing and laminating. From in-house lab solutions to production plants we are able to provide the full range of our customer needs.

About temicon GmbH
temicon GmbH is the leading producer of high-quality micro- and nanostructured products serving the key components for applications like lightning, display, life science, solar technology and environmental enginieering. For more information, visit www.temicon.com.

Coatema at the LOPEC 2016

World’s biggest event for large-area, organic and printed electronics

Munich, GERMANY - organic and printed electronics are among today’s fastest growing technologies and will have a huge impact on our everyday life. Coatema Coating Machinery Company is a market leader in the manufacturing of organic electronics and will introduce their latest advancements at LOPEC 2016 in Munich.

One of the major highlights at LOPEC 2016 will be the introduction of Coatema’s new “Test Solution” product line for roll-to-roll and sheet-to-sheet coating, printing and laminating. This compact and budget orientated product line offers a small scale platform especially for laboratories and R&D centers. Coatema will also present the Smartcoater in a new remodeled layout with 6-in-1 coating system, an integrated register control, UV LED crosslinking system and a new module for photonic sintering. This system can be experienced live at the LOPEC Demonstration Line.

At LOPEC conference, Coatema Vice President Thomas Kolbusch will be a featured speaker focusing in his talk especially on recent developments in nanoimprinting and laser structuring technologies.

Visitors interested in seeing live production of printed electronic products are kindly invited to visit the Demonstration Line at the LOPEC (hall B0/booth 407) where Coatema will produce EL devices on their Smartcoater. All LOPEC attendees are invited to visit Coatema in Munich from April 6th to April 7th, 2016 in hall B0 on booth 405.

For a free invitation for LOPEC visit or further information please contact Coatema via Email This email address is being protected from spambots. You need JavaScript enabled to view it. or by phone on +49 (0) 21 33 / 97 84 - 121.

We are looking forward to meet you at LOPEC 2016.

New technical center introduced at Coatema symposium 2016

Dormagen, GERMANY - March 18th, 2016 – Coatema Coating Machinery Company has introduced their new and remodeled technical center, opening now its latest and technologically upgraded coating and laminating machines for customer trials, hands-on process development and small series production.

Over 80 participants from more than 12 different countries visited and contributed to this year’s symposium of Coatema Coating Machinery Company, held on March 16-17, 2016. The range of introduced coating machines reached from lab scale to fab scale, including a full production line and more compact test solutions for R&D centers.

Three coating and printing series have been presented: 1) A full production line, equipped with automated turret winder, 2) the mid-scale flexible Click-and-Coat unit, including a register control camera and spatially-resolved inline thin film thickness metrology, and 3) the lab-scale Smartcoater, demonstrating onsite a live coating of silver ink for electronic printing applications, including an ultra-fast UV cross-linking dryer and an inline flashlight sintering system.

The symposium conference was focused this year on the discussion of latest advancements in roll-to-roll coating processes and on the expectable gain in coating quality and efficiency by integration of reliable inline metrology. More than 12 speakers and experts contributed with talks on their latest scientific work and experiences, among them experts from Fraunhofer IWS, Heraeus, Henkel and FRT.

Since 2000, the Coatema symposium is a popular annual event mostly frequented by experts and decision makers from science and industry. It is appreciated by attendees for its well established role in facilitating exchange of knowledge and development of new business ideas. The symposium is accompanied by technical live demos and traditionally hosted by Coatema Coating Machinery in Dormagen.

Coatema Seminar at the Brno University of Technology

September 2 - 3, 2015

Brno, CZECH REPUBLIC – Coatema’s new Pilot line to be demonstrated in a one day seminar at the Brno University of Technology on September 2nd to 3rd, 2015 in Czech Reublic.

The Sixth Meeting on Chemistry and Life will be held at Brno University of Technology, Faculty of Chemistry. It will draw upon the tradition of regular meetings providing people from industry, research and academia with a forum to exchange ideas on recent advances in research in materials chemistry, environmental chemistry and technology, food chemistry and biotechnology, physical chemistry and applied chemistry. The conference will be held under the auspices of the rector of Brno University of Technology, Professor Petr Štěpánek.

Conference Agenda:

  • Presentation Coatema Coating Machinery GmbH by Dr. Ludger Michels
  • Presentation Printed Electronics by Dr. Ludger Michels
  • University lecture by Dr. Ludger Michels
  • Question and answer session
  • Lab tour

This gives the newest update on development in Printed Electronics.

We are looking forward to meet you in Brno.

Coatema at the LOPEC 2015

World's biggest event for large-area, organic and printed electronics.

Munich, GERMANY - organic and printed Electronics are some of today's fastest growing technologies. Coatema Coating Machinery company is a market leader in these innovative technologies, will exhibit and do production demonstrations at LOPEC 2015.
Coatema Vice President Thomas Kolbusch will be a featured speaker at this year's LOPEC, which is the world's most prestigious event for large-area, organic and printed electronics which takes place annually in Munich.

One of the highlights at LOPEC 2015 is the presentation of Coatema's new "Test Solution" product line for laboratory coating, printing and laminating. This compact and budget orientated product line offers a small scale platform for sheet-to-sheet and roll-to-roll applications that can be equipped with Slot Die, Doctor Blade, Flexo or Engraved Roller. We also will present the Easycoater new layout with electrical heated dryer and the Smartcoater at the Demonstration Line.

Visitors who are interested in seeing live production of printed electronic products are invited to visit the Demonstration Line at the LOPEC (booth B0.307) where Coatema will produce EL devices on their Smartcoater.

All LOPEC attendees are invited to visit Coatema in Munich from March 4th to March 5th, 2015 on our booth No. 305. If you need a voucher for your visit please contact us via Email.

For further information please contact Mr Martin Noam Przybyla via Email or phone: This email address is being protected from spambots. You need JavaScript enabled to view it. or +49(0)2133-9784-121.

We are looking forward to meet you at LOPEC.

The program is established

14th International Symposium for coating, printing and laminating

A variety of lectures and detailed experiments are waiting for you


Coatema Symposium Program

The schedule for the two-day event on November 4 and 5 can be downloaded here.

Coatema highlights at LOPEC 2014

Coatema Highlights

World’s biggest event for large-area, organic and printed electronics


Coatema LOPEC2014 TS

The International event and congress for printed electronics, short LOPEC, has taken place in Munich last week for the 6th time.

Read more ...

Among the top five

Coatema at the IHK Innovation Award 2014

The Coatema Thin Film Coater / Printer was nominated for one of the best innovations of 2014


2014 05 IHK Innoaward

Dormagen, GERMANY – Yesterday the Chamber of Industry and Commerce awarded the prize of innovation and research for the 6th time. The awarding took place at the Montsforts Quartier in Mönchengladbach and some leading companies introduced fascinating innovations.

Read more ...

14th Coatema Symposium

The date is set ...

The international Coating Symposium has been a fixed event in the coating and printing industry since the year 2000. We are pleased to invite you to the 14th international Coating Symposium on November 4th and 5th 2014

More information is available here.

Coatema at the LOPEC 2014

Coatema at the LOPEC 2014

World’s biggest event for large-area, organic and printed electronics


Munich, GERMANY - organic and printed Electronics are some of today’s fastest growing technologies. Coatema Coating Machinery company is a market leader in these innovative technologies, will exhibit and do production demonstrations at LOPEC 2014. Coatema Vice President Thomas Kolbusch will be a featured speaker at this year’s LOPEC, which is the world’s most prestigious event for large-area, organic and printed electronics which takes place annually in Munich.

Read more ...

Coatema‘s Open House Day

Coatema‘s Open House Day

Live demonstrations of leading edge technology for advanced high-tech research projects were the focus of an Open House at the Coatema Coating Machinery GmbH in Dormagen, Germany on February 19.


More than 100 international visitors from industry, research institutes and universities attended the daylong event at one of the world’s largest and most comprehensive facilities of the type.

Read more ...

This was the nanotech 2014

nanotech 2014

February 5th, 2014 – Dormagen, Germany – The nanotech started with the OE-A and JAPERA meeting in Tokyo this year. The international and Japanese association in the field of Printed and Organic Electronics came together to encourage cooperating business. The meeting was perfectly organized by Prof. Kamate and had a great response so all companies were open for productive discussions regarding future cooperation.

Read more ...

Coatema´s Open House - Program

The program for the open day is fixed now.

Here you can view and download the information.

Please note that all presentations will be held in English.

 

Download Program

 

2014 Tag der offenen Tür

Invitation to Coatema‘s Open House

2014 Tag der offenen Tür

On Wednesday, 19 February 2014, we will organize an Open Day.

Read more ...