Previous symposia

Im Jahr 2001 haben wir das erste Symposium zum Thema Beschichten veranstaltet. Da es von Beginn an größten Anklang gefunden hat, haben wir seitdem fast im jährlichen Turnuns ein Symposium für unsere Partner und Kunden veranstaltet.

Hier sehen Sie eine Zusammenfassung der Vortragsreihen der bisher stattgefundenen Symposien.

 

15th symposium in 2016

Program

14th symposium in 2014

13th symposium in 2012

"Introduction"
Thomas Kolbusch, Coatema Coating Machinery GmbH

"Materials for Lightweight Construction - especially for Aircraft Applications"
Sebastian Steffen, Fraunhofer PYCO

"PrintoCent Factory - business development centre for Printed Intelligence"
Mikko Paakkolanvaara, VTT, Finland

"Spectral Reflectance and Transmittance: Process Monitoring with lab-like Certainty"
Chris Hellwig, Carl Zeiss Microscopy GmbH

"Roll-to-Roll encapsulation of OLED devices under inert conditions"
Dr Stefan Mogck. Fraunhofer IPMS

"Heraeus solutions for printed electronics"
Jürgen Weber, Heraeus Noblelight GmbH

"Continous fabrication of flexible electrochromic devices ba means of roll-to-roll coating and lamination - Results of the EU-funded large collaborative project INNOSHADE"
Dr. Uwe Posset, Fraunhofer ISC

"Measuring coating thicknesses in-line for QA and process control"
Dr. Nancy Hecker-Denschlag, omt - optische messtechnik GmbH

12th symposium in 2011

"Introduction"
Thomas Kolbusch, Coatema Coating Machinery GmbH

"Materials for Lightweight Construction - especially for Aircraft Applications"
Sebastian Steffen, Fraunhofer PYCO

"100 % Surface inspection in coating applications"
Dr. Rudolf Krampe, ISRA Surface Vision GmbH

"Metrology Systems for Quality Control and Process Optimization in Film Production"
Hans Örley, Dr. Schenk GmbH

"Low temperature photonic sintering for printed electronics"
Peter Schullerer, Polytec GmbH

"Pump Systems"
Dr. Carsten Damerau, HNP Mikrosysteme GmbH

"Coatema 2011"
Thomas Kolbusch, Coatema Coating Machinery GmbH

"Prepreg Equipment for the future"
Jürgen Hanel, Coatema Coating Machinery GmbH

"New approaches to printed PV"
Christoph Sele, Solar Press

"R2R compatible rapid electrical sintering of conductors"
Ari Alastalo, VTT

"Resin systems for fibre-reinforced composites"
Pavel Timoshkov, VIAM

11th symposium in 2010

"Introduction"
Thomas Kolbusch, Coatema Coating Machinery GmbH

"Materials for Lightweight Construction - especially for Aircraft Applications"
Christoph Nowacki, RWTH Aachen -WZL

"Tungsten carbide lip slot-die for high precision coating"
Yusuke Furuya, Mitsubishi Materials Corporation

"Flexible polymer solar cells"
Dr. Birger Zimmermann, Fraunhofer ISE

"Measuring systems for thin film technologies"
Andreas Woerz, Keyence Deutschland GmbH

"Roll-to-roll process line for OLED lighting"
Dr. Stefan Mogck and Christian May, Fraunhofer IPMS

"UV-Systems for roll-to-roll printed electronic applications"
Rolf Müller, IST Metz GmbH

"Coatema 2010"
Thomas Kolbusch, Coatema Coating Machinery GmbH

"Inkjet - one pass roll-to-roll"
Dr. Kay Yeong, Xennia Technology Ltd.

"Narrow web corona treatment and the powerfactor"
Rob Hablewitz, Pillar Technologies

"The Smartcoater - a new R&D tool"
Thomas Kolbusch, Coatema Coating Machinery GmbH

"Surface cleaning of polymer films and other substrates"
Martin Streuli, Shinko Europe AG

10th symposium in 2009

"Introduction"
Thomas Kolbusch, Coatema Coating Machinery GmbH

"Organic and Printed Electronics - Chances and Challenges"
Dr. Klaus Hecker, OE-A a working group within VDMA

"Gravure printing and other techniques for fabrication of polymer solar cells"
Dr. Monika Voigt

"InertCoater - Drying and Sintering in Inert Atmosphere for Sophisticated Applications"
Frank Sarnes, Sarnes Ingenieure OHG

"Technical Textiles"
Dr. Rolf-Dieter Hund, Technische Universität Dresden

"The right combination of machinery and transfer substrates for prepreg products"
Andrea Glawe, Coatema Coating Machinery GmbH & Dr. Roland Wilberger, B. Laufenberg GmbH

"Coatema 2009"
Thomas Kolbusch, Coatema Coating Machinery GmbH

"Optical in-line inspection of base material and it´s coatings, with focus on solar application"
Hans Örley, Dr. Schenk GmbH Industriemesstechnik

"Simulation of an industrial belt dryer with regard to the gas phase mass transport"
Prof. Dr.-Ing. Wilhelm Schabel and Philip Scharfer, KIT Karlsruher Institut für Technologie

"High precision lamination of flexible foils"
Irene Kaashoek, TNO Holst Centre

"Conductive films and structures"
Dr. Daniel Rudhardt, Bayer MaterialScience AG

9th symposium in 2008

"Introduction"
Thomas Kolbusch, Coatema Coating Machinery GmbH

"OPERA, for the future of organic & large area electronics in Europe"
Ed van de Kienboom, Plastic Electronics Foundation

"Vision inspection on printed flexible circuits and coated surfaces"
Dr. Michel Popovic, IN-CORE Systems

"PEDOT: PSS for Conductive Coatings"
Dr. Timo Meyer-Friedrichsen, HC Starck GmbH

"Printed intelligence: novel applications and process issues"
Jukka Hast, VTT - Technical Research Centre of Finland

"Solarcells Based on Textiles - An Access for The Energy Supply of Microsystems"
Dr. Uwe Möhring, TITV - Textilforschungsinstitut Thüringen-Vogtland e. V.

"Industrial Printing Beyond Color"
Dr. Andreas Willert, Chemnitz University of Technology

"Coatema 2008"
Thomas Kolbusch, Coatema Coating Machinery GmbH

"Textile Preforms for endless fibre reinforced laminates and composites"
Dr. Heike Illing-Günther and Anja Schumann, Sächsisches Textilforschungsinstitut e.V.

"Coating of active layers on high specialized yarns and filaments"
Andrea Glawe, Coatema Coating Machinery GmbH

"New low viscos silicon rubbers for slot die application"
Johann Müller, Wacker-Chemie AG

"Coating of steelplates, a new approach for structures optimized in weight"
Uwe Maurieschat, Fraunhofer Institut für Fertigungstechnik Bremen

8th symposium in 2007

"Advanced Coating Technologies for High Volume Fuel Cell Electrodes"
Jürgen Mergel, Forschungszentrum Jülich

"R2R Printing and Coating of Polymers for OLED Lighting"
Ike de Vries, TNO / Institute of Industrial Technology

"Global Solutions for Coating Innovations"
Michael Schuhmann, Clariant International AG

"Coating Windows of Slot Coaters Operating in Their Bead Coating Mode"
Prof. Dr. Durst, FMP Coating AG

"Singular Technology for the Production of Fire Resistant Glazing"
Dr. Valentino Villari, Scheuten Glasgroep

"Nanocoating close to the Market"
Moritz Graf zu Eulenburg, Coatema Coating Machinery GmbH

7th symposium in 2006

"Organic Solar Cells at Fraunhofer ISE"
Dr. Michael Niggemann, Fraunhofer Institute

"Organic and Hybrid Solar Cells, technology and market requirements"
Dr. Christoph J. Brabec, Konarka

"DSSC Technology from Roll to Roll Process"
Paul Turney, Renewable Capital / G24 Innovations

"Nanotechnology for Functionalization of Textile Materials"
Torsten Textor, DTNW

"New functions of coating"
Andrea Glawe, COATEMA

"New Coatings on Denim"
Jürgen Hanel, Dystar

"Quality Control System, Qualiscan QMS-10A"
Mathias Wuhlbeck, Mahlo

"Near Infrared (NIR) enhances coating procedure"
Walter Becker, Fachhochschule Niederrhein

6th symposium in 2005

"Reach"
Micheal Pöhlig, TVI Association, Frankfurt a.M.

"Transferable coating results in any width"
Johannes P. Zimmer, Zimmer Austria

"Textile Coatings for digital printing materials"
Jör Bärlocher, Rowa AG

"Innovative building materials with Phase Change"
Dr. Barbara Pause, Textile Testing & Innovation LCC

"New Solution for New Markets"
Andrea Glawe, COATEMA

"Environment-friendly coatings based on Nanogate-Technology"
Rolf Danzebrink, Nanogate

"Electronic Textiles"
Karel Spee

"Nanotechnology in use"
Prof. Dr. Michael Stoll, Falk

"Medical devices and pharmaceutical products coated with pressure sensitive adhesives - an overview"
Jürgen Sigg, IVF Hartmann

5th symposium in 2004

"The China Threat to World Textile and Apparel Trade oder: Geht dem Drachen die Puste aus"
Hartmut Reetz, TVI-Verband e. V.

"Nanomaterialien in der praktischen Anwendung"
Dr. Nora Kunze, Nano-X GmbH

"Ein Messverfahren zur vollständigen Kontrolle der Flächenmasse von Beschichtungen während der Herstellung"
Gerhard Gärtner, Vacutec Messtechnik GmbH

"UV-Silikonisierung auf Folie und Papier"
Jürgen Pomorin, Degussa/Goldschmidt AG

"Durch Nanotechnologien und Beschichtungstechnologien zu neuen Produkten"
Prof. Dr. Schollmeyer, Deutsches Textilforschungszentrum Nord-West e.V.

"Funktionelle Beschichtung von technischen Textilien mit neuen Beschichtungsrohstoffen"
Gerd Brandner, Ciba Spezialitätenchemie

"Entwicklung einer neuen Anlagen-Technologie zur Thermofixierung von Highdistance-Textilien"
Andrea Glawe, COATEMA & Jörg Eckert, Heraeus Nobelight GmbH

4th symposium in 2003

"Der Markt für beschichtete Textilien unter Berücksichtigung der kommenden EU-Stoffpolitik"
Hartmut E. Reetz, TVI-Verband e.V.

"Galvanische und elektrochemische Beschichtung von mit metallisierten Fäden mikrostrukturierten Flächen und deren Anwendung"
Dr. Uwe Möhring, TITV e. V. Greiz

"PU Revolution: die neuen Micro-Emmission Klebestoffe"
Dr. Claudia Meckel-Jonas, Henkel KGAA Düsseldorf

"Entwicklung von Beschichtungsverfahren zur Herstellung dünner Funktionsschichten"
Frank Apsel, ZEBES Wolfen

"Optimale Beschichtungsergebnisse durch präzise Walzentemperierung"
Andrea Glawe, COATEMA & Guido Schulte, Weinreich Industrie-Kühlung GmbH

"Infrarot Trocknung in der Textilveredlung – Grundlagen – Anwendung – Ausblick"
Jörg Eckert, Heraeus Nobelight GmbH

3rd symposium in 2002

"Die Märkte für beschichtete und laminierte, textile Werkstoffe – aktuelle Situation"
Hartmut E. Reetz, TVI-Verband e.V.

"Folien statt klassischer Lackierung in der Fahrzeugbeschichtung"
Dr. Horst Hintze-Brüning, BASF Coating AG

"Nutzen und Anwendung von spezifischen Faserausrüstungen für Spinnvlies"
Regina Köppe, Zschimmer+Schwarz

"100%ige emmissionsoptimierte Polyurethan-Systeme für die Streichapplikation"
Uwe Siebgens, Stahl Holland bv.

"Hocheffiziente Lufttrockner durch Elektrostatik"
Dr. Helma Abele, ITV Denkendorf

"Aufschmelzen und applizieren konventioneller und nachvernetzender Schmelzklebestoffe"
Christian Schwär, Robatech GmbH

"Der heutige und zukünftige Markt der Hotmelt-Rohstoffe"
Martin Schindler, Jowat Lobers & Frank